Cybertronian Metal Diorama – Part I

So diorama’s are showing up all over the net. Lots of people recreating the “Ark.” Which is cool, however I have no intentions of creating the G1 variation of colors, but rather something a bit more realistic. Which brings me to.. What you will need…

1) Aluminum Foil (I picked up the biggest sheet I could find.)

2) Foam / Foam core & cardboard. (Try to make sure the foam is smooth on one side. Otherwise any indentions will lead to the foil showing imperfections or different textures.) You might be able to use some other materials, and even just Foam Board. I used this method as I had it in my garage.

3) Elmers glue (Other glues work but be careful you don’t melt the foam!)

4) Xacto Knife or a sharp blade.

5) Sharpie

6) Measuring Ruler, or something straight (ruler is nice as you can measure your shapes!)

You will need to decide a few things.

– Do you want your diorama to be shiny or more flat. Aluminum foil has two sides that can give two distinct looks. I did both, and the results were really interesting. I used the shiny one for my floor and the other two as the flatter color.

– Type of glue. I used Elmers glue, but there are other glues that will work probably better. Stronger bonds, and even hold better such as a contact cement. Just make sure it doesn’t melt your foam when gluing! Its also important to make sure you get a nice even amount of glue otherwise the foil may bubble.

On to the steps!

1) Glue your cardboard and foam together (Optional) if you need extra support. Elmers glue does a REALLY good job, between cardboard an foam.

2) Let this dry for 15-20 minutes (doesn’t take long…) let it sit longer if you really want a good bond.

3) Zig zag and cross zig zag the foam with a nice covering of glue. (Other glues you can brush on which is nice because you can get a nice covering with no missing areas.) Elmer glue you can add a little bit of water to it but have to wait longer for it to dry. And this sometimes weakens it.

4) Pick which side of aluminum foil you are going with. Make sure you pull long enough sheet to wrap the edges.

5) Start form one corner to the next and gently press and smooth out the bubbles. (Don’t use anything sharp!)

IMG_6481

6) Lines… This part feel free to be artistic. Make horizontal, vertical, and angle lines. Connecting irregular shapes… Remember in the Transformers universe everything technically transforms which may be irregular or connect in seemingly random methods. Try and make it is irregular as possible. I did use somewhat of a “guide” to get an idea of what to do artistically. You can even add circles, triangles, and other various shapes using coasters or maybe a coke can for larger circles.

IMG_6480

nemesis1

Source: tformers.com (Mandingo Rex)

Finally –

Tape the edges (extra down on the back or glue.) I am going to use foil tape on the top and bottom to make sure it doesn’t rip there also. If you glued it really good it shouldn’t happen, but can still “smudge or bend…”

I would suggest if this is fitting within your display case that you cut the foam to size before starting. This will save you from having to cut the aluminum and resizing the whole thing down to fit later.

Part II of this tutorial will include painting and adding additional details. I need to do some testing before I start on this part as I am not sure how certain paints will work with the aluminum just yet. Part II is now complete click the link to see the results. I have more plans to do different variations in the near future.

Total project here for this was about 2 hours to complete. Which is A LOT less time than having to do some serious painting and such.

Material costs: (About) $25.

– Foam $1.50 – $5 a piece (Foam board is the least here…)
– Glue $2.00 – $5.00 (Depending on the type of glue you use…)
– Aluminum Foil $5.00 (Might be able to get this on sale. This also varies depending on the size.)
– Sharpie $1.50 or more for a pack.

Tags:
Share it:

Space Bridge / Star Gate

So part of starting this site was for me to come up with and create some display cases for my collection of Transformers to stand in. Recently while “day-dreaming” about all of this I thought about how cool it would be to have a Space Bridge ahem Star-Gate (Yes big SG-1 fan here too!) to be the bridge between Cybertron & Earth…

Here is my first draft. It is fairly messy, and still much to work out. It definitely needs more “points” these are Cybertronian symbols 1, 3, 5, 7, and 9. I should probably have all 9 numbers in there for the sake of consistency.

IMG_6089

Right now I am looking at using either Styrofoam or Cardboard for the structure. The gate will comprise of two pieces so I can insert LED lights into each of the numbered portions. (Ideally each on their own switch.) You can find 3mm LED’s on Ebay for pretty cheap. I recently ordered 500 LED’s for $8.50.

Second part to this I am looking at making the interior part when the gate is actually “on.” This will comprise of a few parts. First layer being a graphic printed to give it a depth. Additionally I am looking at the idea of layering that graphic so I can insert some LED’s and defuse them so it lights up evenly.

On the top most layer I am going to add some liquid water woodlandscenics.com

 

As you can see all sorts of things can be done with this. Looking at the final part where they made a “swirl” in a cooking pan this is similar to what I am looking at doing for the gate. And with the added light behind this it should make for a very cool affect.

 

Share it:

Funnies – Customs

Starting another thread of posts here today and starting it off. A life size Ravage…

Down kitty!

10013535_739675496098212_6520066952423912274_n

 

Based on the size of this I am guessing the maker used foam and sculpted it with various tools such as a hot wire and some other various knives. Otherwise using wood or other material might make this way to heavy…

Creator / Source: Foamtastic Props

Tags:
Share it: